Are you completely fed up with “SD Card won’t format” error? Does this error occurs when you try to add or remove files from the SD card? Does unstoppable warning messages are creating troubles for you? Do you want to fix the aforesaid error in easiest way. If you are responding affirmative to all these questions then no need to panic. After reading the given article, you will find complete information about “SD Card won’t format” error, its causes, and the working guidelines to fix it permanently. So, follow the steps carefully.
SD card stands for Secure Digital card which allows the users to save huge amount of files, photos, videos, documents etc. You can use the memory card in smartphones, digital cameras etc. These cards are available in various sizes ranging from 1GB to 256GB and more. You can select them according to your requirement. However, it is extremely useful but many users claims that they are detecting “SD Card won’t format” error while formatting their memory cards. In such a case, you will be unable to add new files or remove the saved ones. It is completely an annoying alert which will make your card inaccessible. You should know that such alerts mostly occurs when the card gets corrupted or damaged. Nobody wants to deal with such situation but it is possible at anytime with anybody.
You should know that there are many reasons which causes corruption of the SD card and results to “SD Card won’t format” error on the screen. Some of the common factors has been mentioned below:-
Malware Infection: It is the most common reason behind corruption of the SD card. If you will connect your card with the infected devices or system then harmful threats will invade secretly in the card and results to damage of the saved files.
Add Files when Memory is Full: Some users doesn't deletes the unwanted files and tries to add new files when there is insufficient space in the card. It can results to deletion of previously saved data.
File System Error: Once the SD card will get damaged, it will affect the file system. It will also stop you from formatting the card and generates such errors on the screen.
SD Card has Restrictions: If your card is write protected or it has limited permissions then you will be unable to perform any activity according to your choice.
Bad Sectors in SD Card: If your SD card has bad sectors then it will stop you from formatting the memory card.
Due to the alert, you will start to detect unstoppable error messages on the screen. Some of the commonly detected alerts has been mentioned below:-
Windows was unable to complete the format SD card.’
‘Memory card not formatted. Operation failed.’
‘Formatting FAT32 failed.’’
‘The format did not complete successfully.’
‘Unable to format. SD card is write protected.’
If you want to fix the error through manual method then you need to make use of Disk Management option in Windows operating system. It is one of the popularly used utility in Windows which allows the users to view and manage their drives as well as partitions in the system. It supports various activities including formatting of the drive. To perform complete format, you need to follow the given steps carefully.
Type Computer Management in the search box of Windows.
From the list, you need to choose Computer Management option.
From the left pane, click on Disk Management option.
You need to select your SD card drive and right click on it. Now, choose Format option.
It asks the users to select their file system such as FAT32, NTFS, or exFat.
Finally, click on Perform a quick format option and click on OK button.
Connect your SD card with the system.
Open Run command by pressing Windows + R keys and press Enter.
Once CMD Window will appear, you need to type diskpart.
Now, type list disk and hit Enter key.
Type select disk X and tap Enter to choose the SD card drive.
Again enter list partition Y and press Enter.
Now, type format fs=ntfs quick and pres Enter.
Finally, type exit and Enter to close the cmd Window.
Important Point to Remember: Be careful while typing the commands. Any wrong step can cause permanent crashing of the operating system. If you are a novice user then avoid following the manual steps.
Once “SD Card won’t format” error starts to appear, it will also damage your saved pictures or videos. If you want to restore them in effective manner then you are suggested to make use of Stellar Photo Recovery Software. It is one of the advanced tool which has ability to perform complete scanning in the system by using advanced and high level algorithms. It is capable to detect all types of deleted or corrupted pictures as well as videos in effective manner. It supports user-friendly interface which can be easily handled by the non-technical users also. Moreover, this tool is compatible with different versions of Windows as well as Mac operating system. The best part of the software is that it will never change the files quality and restores in the original size or format. So, what are you waiting for, download the trial version of the tool to check its working efficiency and performance.
Jpeg recovery is one of the best solutions to recover deleted picture from jpeg files because of some special features which can not be ignored:-
Features of Jpeg Recovery Software:-
Processor : Pentium Class or higher class processors
Operating System : Windows (Windows 2000, XP, Vista, 2003) and Macintosh (Mac 10.4 x tiger, 10.3.9 Panther, and 10.5 x leopard)
Memory : At least 256MB of RAM(recommended)
Hard Disk : 30 MB of free disk space
There are few user guide steps for Windows operating system that will help in recovering all the damaged photos with ease:--
Step 1:-Install the software and Launch it. The first screen will appear on the screen. You need to click on "Recover Photo, Audio & video" option.
Step 1: Select the desired location or drive to recover the lost files.
Step 3:Choose the specific file format from the Advanced settings and click on Scan Now button to begin the scanning process.
Step 4: You can also choose specific region i.e. Starting and ending sector.
Step 5: The software will detect all the media files and you can see it during the scanning progress.
Step 6:A list of all the detected files will appear on the screen.
Step 7:You can also change the view of the file to see it clearly.
Step 8:Finally, click on Recover option after selecting the files.
Following User Guide for Mac will help you to recover the lost photos and videos in few steps:
Step 1:-Download and install the software. Now, you need to launch the application. From its first screen, you need to click on "Recover photo, Audio, & Video" button.
Step 2:Select the desired drive or location from where you want to restore the images and click on "Scan Now" option.
Step 3:You can see the scanning progress on the screen.
Step 4: It will show the list of files which can be recovered. You need to select your file and click on Recover option.
JPG, TIFF/TIF, PNG, BMP, GIF, PSD, CRW, CR2, NEF, ORF, RAF, SR2, MRW, DCR , WMF, DNG, ERF, RAW, etc.